Walksnail P18 dual-mode whoop micro FPV quad

01｜Walksnail P18 · dual-mode whoop / Click to view full image

02｜Three colors: black, white, and black-and-gold / Click to view full image

03｜Two forms, one whoop: whoop and toothpick modes (official image) / Click to view full image

04｜1080P/120fps · 147° wide FOV · real-time audio (official image) / Click to view full image

05｜Audio and video together, recorded and transmitted live / Click to view full image

06｜Small frame: approx. 33g · 68mm wheelbase (official image) / Click to view full image

07｜3-in-1 flight controller and power system / Click to view full image

08｜Ascent system, with a clear matching path / Click to view full image

09｜A30-connector battery and 6-channel charger / Click to view full image

10｜Factory accessories — check them before you buy / Click to view full image

11｜Indoors or outdoors, fly when you want to · artistic composite · not a record of an actual test flight / Click to view full image

12｜Audio and video together, recorded and transmitted live · artistic composite · not a record of an actual test flight / Click to view full image

A dual-mode whoop micro FPV quad

The Walksnail P18 is a dual-mode whoop micro FPV quad with a built-in Walksnail Ascent Lite+ HD digital VTX. With the duct ring on, it is a whoop: smoother flying, better for filming. With the duct ring off, it is a toothpick: more agile, better for racing. Switching modes by hand takes about 30 seconds, and there are 2 PID sets. Available in black, white, and black-and-gold.

VTX and recording

1/2.8-inch sensor, 147° ultra-wide field of view, 16:9 image, up to 1080P/120FPS, average latency about 35ms. Maximum transmit power 500mW (FCC/SRRC<27dBm, CE<14dBm), frequency range 5.730–5.815GHz. Supports synchronized audio and video recording and transmission. Audio is available only at 720P 60/100/120fps and 1080P 60fps; 1080P 100/120fps does not support audio.

Airframe and power

68mm wheelbase, HQ 45mm 1.8×1.3×3 propellers installed inverted, 1102 22000KV motors, about 33g (battery not included). A triangular reinforced structure, and a streamlined canopy with cooling vents.

Flight controller

Flight controller, ESC, and ELRS 2.4GHz receiver in one: STM32G473 processor, ICM42688 / BMI270 gyro, ESC 1S 12A continuous / 18A peak, ELRS V3.5.0 receiver, 16M Blackbox, BEC 5V3A, configuration port SH1.0-4P. 4 programmable LEDs can be customized for color and lighting in Betaflight. A GPS pad is reserved.

Battery and charging

A30 connector, fits 1S 580mAh/680mAh batteries (680mAh recommended). Batteries are sold separately. The factory charger has 6 channels, Type-C USB input, 5V–12V, supports USB PD/BC1.2 fast charge, maximum input 30W, and can be powered from a power bank, DC, or a car supply.

System matching

Can be received by Ascent goggles, Ascent VRX, or Ascent VRX Pro. The air unit can be swapped for Ascent Lite, Avatar 1S, Avatar 1S Lite, and compatible third-party VTXs. Mounting patterns 20×20 / 25.5×25.5mm. Firmware is updated through the Type-C port and the official PC tool. A receiver, goggles, and radio are sold separately. Factory packing contents follow what is actually in the box. Ask us for purchase details.